The heart of the system is the Terminator® - a computer-controlled pressure/vacuum unit that can be used anywhere thanks to its rechargeable battery power supply. With this innovative laminated glass repair system, a fitter can repair all stone chip damage to the highest quality after just a short briefing. After attaching and filling the injector unit, the Terminator® carries out the repair, i.e. injecting the repair resin into the damaged area through targeted pressure and vacuum cycles, without any further operator intervention. In combination with the proven ProGlass injector unit, you get an extremely user-friendly system. After filling the resin chamber, the Terminator® is connected to the injector unit via a flexible hose. Select the appropriate program on the device (star, cow's eye or express) and start the repair process. The pressure/vacuum unit carries out the process automatically and informs the fitter visually and acoustically as soon as the program is complete. The injector unit is then removed and the repair is cured and polished with cover resin in the usual way. The sophisticated program sequence is based on over 20 years of experience in laminated glass repair and results in optimum filling of the damaged area without air inclusions. This increases the quality of your repairs while at the same time reducing the amount of work involved. With this innovative repair system, even an inexperienced fitter always achieves optimum results.